Blade technology applied to the Keo 2 Max: new clip-in/clip-out sensations, aerodynamic profile

Large and wide platform (400 mm² / 60 mm) for excellent pedalling stability and good power transfer

New spindle system providing reduced platform height (14 mm)

2 clip-out tension settings: 8 / 12

A more aerodynamic integrated composite blade pedal

Quick and secure clip in / clip out

Maximum optimised stability and power transfer

Very light

Customize your cleats' ajustment thanks to the KEO FIT system

• COMPOSITE MATERIAL BLADE

The Keo 2 Max Blade is made of injection-moulded composite fibreglass material providing cleaner engagement than a Keo 2 Max pedal but less radical than a Keo Blade 2. Two blade versions are offered for 2 different tension levels: version 8 and version 12. Integrating the blade into the pedal body gives the Keo 2 Max Blade and aerodynamic profile for optimal air flow.

• VERY LARGE PEDAL PLATFORM AREA

With a 400 mm2 stainless steel platform, the Keo 2 Max Blade is positioned between the Keo 2 Max and the Keo Blade 2 providing excellent stability and very good pedalling efficiency. This efficiency is also made possible by permanent cleat-stop contact: the shape of the stops at the rear of the pedal has been designed to fit the shape of the rear of the Keo cleats.

• TOP QUALITY SPINDLE SYSTEM

The spindle system used on the Keo 2 Max Blade is the same as that used on the Keo Blade 2: 2 ball bearings and one needle bearing thus ensuring high product reliability, besides passing tests in excess of standards* that LOOK commits to having its products subjected to

2 million cycles at 100 rpm with a 90 kg load on the centre of the pedal and eccentric rotation (the standard requiring 100,000 centred rotation cycles with a 65 kg load). This is the equivalent of a 1,700 watt sprint by Mark Cavendish at 100 rpm for 333 hours!

• Q-FACTOR ADJUSTMENT

The new LOOK spindle’s 14 mm thread length enables Q-Factor to be adjusted by 2 mm using a special spacer available as a spare part.

This increases from 53 to 55 mm.

(Part number: DTPD/0153100).